產品詳細資料
由于輸入多路復用器的低通道輸入由模擬輸入和自測試多路復用器信號共享，相應的輸入通道也通過自測試多路器進行路由，所有活動組件都以“回送”方式運行?？刂铺幚砥骺梢酝ㄟ^(guò)向特定輸出通道發送電壓電平代碼，然后驗證ADC在對信號采樣后產生相同的代碼，以在線或離線模式執行環回測試。該技術在第4節自檢標準中有詳細描述。車載標定測試電壓參考可跳線配置為標稱±2.5 VDC、±5.0 VDC或±10 VDC（實際電壓略低于這些電壓，以確保自檢和自動校準期間的范圍內轉換）。
Because the low channel inputs of the input multiplexers are shared by both the analog inputs and the self-test multiplexer signal, the corresponding input channels also are routed through the self-test multiplexer.Loopback Testing of Inputs and Outputs By routing, the analog outputs through the analog input multiplexers (see previous section), all active components are exercised in a "loopback" arrangement. The controlling processor can perform a loopback test in either the on-line or off-line mode by sending a voltage-level code to a specific output channel, and by then verifying that the ADC produces the same code after sampling the signal. This technique is described in detail in Section 4.Self-Test Standards The on-board CAL TEST VOLTAGE REFERENCE is jumper-configurable to one of the following levels as nominally ±2.5 VDC, ±5.0 VDC, or ±10 VDC (actual voltages are slightly less than these in order to ensure in-range conversions during self-test and autocalibration).
主營產品簡介
專注于DCS、PLC、機器人控制系統、大型伺服四大系統領域。

主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。

優勢：供應進口原裝正品，專業停產配件，

發貨快，貨期精準，

主營品牌包括 ABB貝利、GE/FUANC、FOXBORO、英維思TRICONEX 、本特利BENTLY、A-B羅克韋爾、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韋爾HONEYWELL 、力士樂REXROTH、KUKA、NI、DEIF、橫河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只賣庫存產品;出完需訂貨!價格以客服說明為準!!訂貨貨期以客服說明為準，有任何疑問請聯繁客服! Limited stock, Contact US!

●使用前:

在操作和維護，安裝設備之前，請閱讀并嚴格遵守安全相關的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必須從事安裝，組裝或維護設備等相關工控電氣機械以及其他相關技術的人員。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.應用范圍:

應用于品牌本系列工業以及生產生活自動化設備產品。

Used in the brand of this series of industriaand production automation eauipment products

適用于場景:系統集成，非標定制，產線升級改造，原設備電氣替換等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人員:

應該由本品牌專業培訓操作員來安裝、操作和維修設備。專業人員具有技術能力強，熟悉安全信息和安全實施:

熟悉設備的安裝加工、操作和維護:熟悉處理所有的潛在危險情況。

Equipment should be installed,operated and maintained by trained operators from the brand

●危險情況

警告

.請注意使用人員的人身安全。

●除了產品特性以及功能，還需了解產品的使用壽命環境。

●充分學習產品使用手冊，否則非專業人員可能會造成人身危險。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服務行業

適用水泥，木業，石業，橡膠，石油，化工，發電，環保，水處理，制冷，交通，鋼鐵，食品，飲料，船舶，制冷等行業

Applicable to cementwood,stone,rubber,petroleumchemical, power generation