產品詳細資料
為了為測試和校準雙極范圍提供正參考和負參考，CAL TEST電壓被路由到自檢多路復用器的HIGH（非反相）和LOW（反相）輸入端。3.9.4增益自動校準如圖3.9.4-1所示，通過調整ADC的參考輸入實現增益自動校準。12位自動增益DAC的輸出被偏置和衰減，以產生±1.2%的增益調整范圍，對應于每個DAC LSB 0.0006%的調整分辨率。增益DAC的控制數據被寫入位于VMIVME-3111分配的地址空間中的相對地址0A（HEX）處的16位“僅寫”寄存器中，為12位，右對齊。3.9.5零自動校準在任何高增益、直接耦合的信號路徑中，輸入端的零偏移誤差與路徑增益相乘，因此可能產生較大的輸出誤差。因此，VMIVME-3111中的零自動校準在可編程增益放大器（PGA）的輸入端執行。
To provide both positive and negative references for testing and calibrating bipolar ranges, the CAL TEST voltage is routed to both the HIGH (noninverting) and LOW (inverting) inputs of the self-test multiplexer. 3.9.4 Gain Autocalibration As shown in Figure 3.9.4-1, gain autocalibration is implemented by adjusting the reference input of the ADC. The output of the 12-bit autogain DAC is offset and attenuated to produce a gain adjustment range of ±1.2 percent which corresponds to an adjustment resolution of 0.0006 percent per DAC LSB. Control data for the gain DAC is written as 12 bits, right-justified, into a 16-bit WRITE ONLY register located at relative address 0A (HEX) in the VMIVME-3111 assigned address space. 3.9.5 Zero Autocalibration In any high-gain, direct coupled, signal path, zero offset errors at the input are multiplied by the path gain and can, therefore, produce large output errors. For this reason, zero autocalibration in the VMIVME-3111 is performed at the input to the Programmable Gain Amplifier (PGA).
主營產品簡介
專注于DCS、PLC、機器人控制系統、大型伺服四大系統領域。

主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。

優勢：供應進口原裝正品，專業停產配件，

發貨快，貨期精準，

主營品牌包括 ABB貝利、GE/FUANC、FOXBORO、英維思TRICONEX 、本特利BENTLY、A-B羅克韋爾、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韋爾HONEYWELL 、力士樂REXROTH、KUKA、NI、DEIF、橫河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只賣庫存產品;出完需訂貨!價格以客服說明為準!!訂貨貨期以客服說明為準，有任何疑問請聯繁客服! Limited stock, Contact US!

●使用前:

在操作和維護，安裝設備之前，請閱讀并嚴格遵守安全相關的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必須從事安裝，組裝或維護設備等相關工控電氣機械以及其他相關技術的人員。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.應用范圍:

應用于品牌本系列工業以及生產生活自動化設備產品。

Used in the brand of this series of industriaand production automation eauipment products

適用于場景:系統集成，非標定制，產線升級改造，原設備電氣替換等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人員:

應該由本品牌專業培訓操作員來安裝、操作和維修設備。專業人員具有技術能力強，熟悉安全信息和安全實施:

熟悉設備的安裝加工、操作和維護:熟悉處理所有的潛在危險情況。

Equipment should be installed,operated and maintained by trained operators from the brand

●危險情況

警告

.請注意使用人員的人身安全。

●除了產品特性以及功能，還需了解產品的使用壽命環境。

●充分學習產品使用手冊，否則非專業人員可能會造成人身危險。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服務行業

適用水泥，木業，石業，橡膠，石油，化工，發電，環保，水處理，制冷，交通，鋼鐵，食品，飲料，船舶，制冷等行業

Applicable to cementwood,stone,rubber,petroleumchemical, power generation